TEF 2441 PLC Dual low intensity Type A 10Cd

2016.01.09 · 障碍灯

首页 > 障碍灯 > 正文

TEF 2441

TEF 2441
Redundant Obstruction Light
 
 

Technical Data

Material Acid proof stainless steel, coated with three seperate layers of paint (RAL 9002), Globe – polycarbonate lexan
Input voltage 230V AC   50Hz
Light source 2 x compact fluorescent tubes PLC 8, 10 or 13W
Lamp holder G24D
Power consumption <20W
Light output >10 candela red
Weight 3,8 kg.
Colour globes available White, yellow, red, blue, green and yellow amber
IP-rating IP66/67
Standard cable entries 4 x M25 stopping plug
For use in Zone Safe area
Tamb -20°C to +40°C
Installation Only to be installed with globes in upright position. (as shown on picture)
 

Applications

  • Signal lighting
  • Obstacle marking
  • For use in safe area
 

Features

  • Rugged and low profile
  • Easy to install and maintain
  • Proven ingress protection
  • Long lamp life using compact fluorescent tube, up to 9000 hours
  • Automatic lamp change-over when lamp failure
  • Can be supplied with potential free alarm contact
  • Short ignition time at low temperature
  • Resistant to vibrations
  • Theoretically expected maintenance free for up to 18 000 hours
 

Certificates

NA
 

Part Numbers

Obstruction light with 2 light sources, potential free alarm contact 2441 000
Obstruction light with 2 light sources, no alarm 2441 001
 

Spare Parts

Globe polycarbonate, red, without gasket 5044 2006
Fluorescent tube, PLC 13W/84 9400 060
Reactor and lamp holder, spare part kit 2510
Globe retainer ring 2547
Silicon gasket for globe 5001 0021
 

Downloads