Illuminated Windsock TEF 9968
Overview
The TEF 9968 LED illuminated windsock is designed out of corrosion resistant materials. All exposed materials are Stainless steel AISI 316L and brass. The windsock internally lit with red LED light, causing minimal glare and minimal reduction in pilot’s ability to see in the dark.
Optionally delivered with a RED + IR (NVG compatible) obstruction light on top.
The rugged construction with integrated LED lights and no use of electrical slip ring units – significantly reduce maintenance cost resulting in extremely low lifetime cost.
TEF 9968 is designed for use in Zone 1, 2 and safe areas
Technical Data
| Housing | Brass and Stainless steel (EN 1.4404), Polycarbonate dome on lamps |
| Input voltage |
24V DC +/- 30% 100-254V AC |
| Max power | 15 Watt |
| IP-rating | IP66/67 (According to IEC 60529) |
| Area of use | For zone 1,2 and safe area (Ex e mb op is IIC T5 Gb (Atex and IECEx)) |
| Weight | Approx. 50 Kg |
| Tamb |
-52°C to +55°C |
Applications
Wind indication on :
- Helicopter landing areas
- Airports
- Bridges
- Highways
Features
- Rugged and solid construction
- Easy to install and maintain, maintenance free lights
- The windsock is internally lit with red light, causing minimal glare and minimal reduction in pilot's ability to see in the dark
- Delivered with 10 meter flying lead armoured cable (Other lengths on request)
- Red IR (NVG compatible) obstruction light on top on 24V DC version
- Resistant to vibrations
- Bearing for the rotating wind vane, is encapsulated in solid brass housing
- EN/DIN mounting flange for 60,3mm pipe
- Delivered with one spare windsock kit size Ø=0,6m , small windsock size Ø=0,3m, L=1,3m are available on request
Certificates
Presafe 14ATEX4571
IECEx PRE 14.0009
Part Numbers
For partnumbers see datasheet
Spare Parts
For partnumbers see datasheet