TEF 2441
TEF 2441
Redundant Obstruction Light
Technical Data
| Material | Acid proof stainless steel, coated with three seperate layers of paint (RAL 9002), Globe – polycarbonate lexan |
| Input voltage | 230V AC 50Hz |
| Light source | 2 x compact fluorescent tubes PLC 8, 10 or 13W |
| Lamp holder | G24D |
| Power consumption | <20W |
| Light output | >10 candela red |
| Weight | 3,8 kg. |
| Colour globes available | White, yellow, red, blue, green and yellow amber |
| IP-rating | IP66/67 |
| Standard cable entries | 4 x M25 stopping plug |
| For use in Zone | Safe area |
| Tamb | -20°C to +40°C |
| Installation | Only to be installed with globes in upright position. (as shown on picture) |
Applications
- Signal lighting
- Obstacle marking
- For use in safe area
Features
- Rugged and low profile
- Easy to install and maintain
- Proven ingress protection
- Long lamp life using compact fluorescent tube, up to 9000 hours
- Automatic lamp change-over when lamp failure
- Can be supplied with potential free alarm contact
- Short ignition time at low temperature
- Resistant to vibrations
- Theoretically expected maintenance free for up to 18 000 hours
Certificates
NA
Part Numbers
| Obstruction light with 2 light sources, potential free alarm contact | 2441 000 |
| Obstruction light with 2 light sources, no alarm | 2441 001 |
Spare Parts
| Globe polycarbonate, red, without gasket | 5044 2006 |
| Fluorescent tube, PLC 13W/84 | 9400 060 |
| Reactor and lamp holder, spare part kit | 2510 |
| Globe retainer ring | 2547 |
| Silicon gasket for globe | 5001 0021 |
Datasheet